| The Evolved Lighting™ Product List |
|
| Gyoury Evolved Dimming Light: |
Item # GLD1 $1,145.00 |
|
 |
Comprising 110V AC electronic flicker free ballast, clip on/clip off main reflector with open face measuring 5"x23" and two high intensity 55 watt wands (5600° K or 3200° K ‚ your choice). Reflector has a removable mirror finish liner to broaden light output, and two barndoors with lifelong computer hinge. Complete light is mounted on a ball and socket joint terminating in 7/16" diameter x 3" spud. Dimmable range is 1% to 100%.
Under 6lbs. (without ballasts is 3lbs) |
|
|
| Gyoury Evolved Non-Dimming Light: |
Item # GEL-ND1 $792.00 |
|
 |
Comprising 110v ac electronic flicker free ballast, clip on/clip off main reflector with open face measuring 5"x23" and two high intensity 55 watt wands (5600° K or 3200° K ‚ you choose). Reflector has a removable mirror finish liner to broaden light output, and two barndoors with lifelong computer hinge. Complete light is mounted on a ball and socket joint terminating in 7/16" diameter x 3" spud. Dimmable range is 1% to 100%.
Under 6lbs. (without ballasts is 3lbs) |
|
|
| Gyoury Wands™: |
|
|
 |
Gyoury Wands™ are removable from the Reflector, and with an extension cable can be lit independently. Each Evolved Lighting Kit™ comes with 2 different types of florescent lights. Each wand has a molded in base for easy holding, with a short cord and a plug at the end. With the advantage color constant non fluctuating temperature, compared to standard lighting. |
|
|
| Gyoury Wand™ (Daylight): |
Item # GEL-WD $48.00 |
|
 |
55 watt 5600° K (daylight) high intensity fluorescent lamp with special white molded base and 4" pigtail and Amphenol 4 pin connector.
The Gyoury Wands™ provide a great benefit in minimal power usage. Each wand draws 1/2 AMP of power, allowing you to have up to 20 pairs of Gyoury Wands™ running off of only one typical power supply.
Plus there's no annoying hum, no green hues, and no heat build up! |
|
|
| Gyoury Wand™ (Tungsten): |
Item # GELWT $48.00 |
|
 |
55 watt 3200° K (indoor) high intensity fluorescent lamp with special yellow molded base and 4" pigtail and Amphenol 4 pin connector.
The Gyoury Wands™ provide a great benefit in minimal power usage. Each wand draws 1/2 AMP of power, allowing you to have up to 20 pairs of Gyoury Wands™ running off of only one typical power supply.
Plus there's no annoying hum, no green hues, and no heat build up! |
|
|
| Gyoury Evolved Lantern™ Kit: |
Item # GLLK $280.00 |
|
 |
24" ball of soft light slides onto a standard Painter's Pole (not included, but easily obtained via Home Depot or Lowes). A special expanding lantern spud is available at $25.00 for gripping the lantern stem, providing a 5/8ths inch dia. spud. Lantern diffusion is 1/4 grid cloth. Ballast easily snaps onto painter's pole as counterweight or can snap onto riser of light stand. The Lantern accessory turns your wands into soft light lamps through quarter grid cloth that goes around the stem and the wands. It allows you to be well out of shot through 12 ft. extension to follow your artist and apply beautiful soft cosmetic light. Perfect for any occasion where versatility and mobility is a must. |
|
|
| 9ft Gyoury Wand™ Extention Cord: |
Item # GLC9 $80.00 |
|
 |
For using individual Gyoury Wands at a distance from the ballast. Twin cables with two male and two female connectors. Use (9ft long) with Lantern Kit and (20ft long) for all other applications.
The extension cord is a great accessory to the Gyoury Evolved Lighting System. It allows you to connect to either the full Evolved Light or to Gyoury Wands and have up to 9 feet in any desired location. |
|
|
| 20ft Gyoury Wand™ Extention Cord: |
Item # GLC20 $115.00 |
|
 |
For using individual Gyoury Wands at a distance from the ballast. Twin cables with two male and two female connectors. Use (9ft long) with Lantern Kit and (20ft long) for all other applications.
The extension cord is a great accessory to the Gyoury Evolved Lighting System. It allows you to connect to either the full Evolved Light or to Gyoury Wands and have up to 20 feet in any desired location. |
|
|
| Evolved Quick Mount Eggcrate™: |
Item # GLE $65.00 |
|
 |
All aluminum constructed, anodized black eggcrate accessory mounts to the Evolved Light with Velcro tabs allowing you to narrow the spill of the light. |
|
|
| Pin Ball Adaptor™: |
Item # GLPB $38.00 |
|
 |
The Pin Ball Adaptor allows you to go mobile with less weight than a C Stand, using many of the lighter weight options available in the field, such as Manfrotton, available through Bogin Imaging.
The Pin Ball Adaptor fits right on top of these stands and mounts in place with the wing-screw in a matter of seconds. |
|
|
| Evolved Universal Wand Mount™: |
Item # GLWM $110.00 |
|
 |
The ultimate tool to hold your Gyoury Wand™ in challenging spaces. Miniature ball and socket mount terminating in 1/2" diameter x 2 1/2" spud. (Use with a C stand) Can be used to hold one or two Gyoury Wands™ (two in opposing directions). Adjustable to any angle. Complete with nylon hardware. The Universal Wand Mount with 2 ball and socket joints allows for a dynamic application for wand mounting. |
|
|
| Evolved Mini Reflector™ w/ Barn Doors: |
Item # GLMR $100.00 |
|
 |
The Mini Reflector is an individual wand reflector that simply slides over the Gyoury Wand, with built in barn doors makes it great for adjusting the light pattern down to a thin slit. May be used in conjunction with universal wand mount. |
|
|
| Ridged Hardened Plastic Carrying Case: |
Item # KC $350.00 |
|
 |
This case holds up to two complete Gyoury Evolved Lights mounted to a special Mounting Board and all your accessories. The Mounting board can also be used as a stand for your lights. The case has a foam lined cavity for your accessories.
Outside dimensions: 28"X 20"X 10"
|
|
| |
|
|
| |
|
|
